Operations
Control panel02 |
|
|
| 10 |
|
|
|
| |
|
|
|
| 08 |
01 |
|
|
| 11 |
|
|
| 09 | |
|
|
|
| |
03 | 04 | 05 | 06 | 07 |
01 | Cycle Selector | Turn the dial to select a cycle. | |
|
|
| |
|
| The display shows current cycle information and estimated | |
02 | Display | time remaining, or an information code when a problem | |
|
| occurs. | |
|
|
| |
03 | Temp. | Press to change the water temperature for the current | |
cycle. | |||
|
|
Press to change the rinse count for the current cycle. You
04 
Rinsecan set the rinse count to a max of 5, depending on the cycle.
|
| Press to change the spinning speed for the current cycle. | |
|
| The revolutions per minute (RPM) differs with the model. | |
|
| • Rinse Hold : The final rinse process is suspended so that | |
|
| the laundry remains in the water. To unload the laundry, | |
|
| run a drain or spin process. |
|
|
| - To use the Rinse Hold option, press | Spin |
|
| repeatedly until all the Spin option indicators turn off. | |
05 | Spin | • No Spin : The drum does not rotate after the final | |
drain process. |
| ||
|
|
| |
-To use the No Spin option, press 
Spin repeatedly until the No Spin indicator ( 
) turns on.
•Spin Only 
: To run the Spin Only cycle, press 
Spin for 3 seconds. When the cycle time and spinning speed appear, press 
Spin repeatedly until a desired spinning speed is selected. Then, press 
Start/Pause to start the cycle. The spinning time depends on the selected cycle.
Operations
English 33
|
| ||
|
| ||
|
|
|
|