Operations
•When using hot water for the wash, the Add Door may appear to leak water after opening and closing the Add Door. This is normal, simply because steam emerging from the open Add Door has cooled and formed water drops on the surface.
•When the Add Door closes, the door seals up and no water can leak. However, you may encounter what appears to be water leak around the door - some residual water remaining around the Add Door may form water drops. This is normal.
•Neither the main door or the Add Door can be opened when the water temperature is over 50 ˚C. If the water level inside the drum is over a certain point, the main door cannot be opened.
•If an information code of ddC appears on the display, see the “Information codes” section for further actions.
Settings
Operations
Child Lock 
To prevent accidents by children, Child Lock locks all buttons except for 
Power.
•To set the Child Lock function, hold down 
Temp. and 
Rinse simultaneously for 3 seconds. To activate, press 
Start/ Pause.
•Once the Child Lock is activated, all controls will be disabled except for 
Power. To manipulate controls, deactivate the Child Lock first.
•To deactivate the Child Lock function, hold down 
Temp. and 
Rinse simultaneously for 3 seconds.
NOTE
In the Child Lock state, you must first deactivate the Child Lock if you want to add detergent or laundry, or change the current settings.
Sound On/Off 
You can turn on or off the sound from the washing machine. Your setting will be kept even after restarting the machine.
•To mute the sound, hold down 
Rinse and 
Spin simultaneously for 3 seconds.
•To unmute the sound, hold down again for 3 seconds.
38 English