Samsung WW8SJ5260GW/KJ manual Operations, Control panel

Operations

Control panel

		02				08
							11
	01					09
		03	04	05	06	07	10
01	Course Selector	Turn the dial to select a course.
02	Display	The display shows current course information and estimated time
		remaining, or an information code when a problem occurs.
03	Temp.	Press to change the water temperature for the current course.
04	Rinse	Press to change the rinse count for the current cycle. You can set the
		rinse count to a max of 5.

		Press to change the spinning speed for the current course.
		•	Rinse Hold (No indicator): The final rinse cycle is suspended so
05	Spin		that the laundry remains in the water. To unload the laundry, run
			a drain or spin cycle.
		•	No Spin : The drum does not spin after the final drain cycle.
06	Options	Press to select an option from Intensive, Prewash, and
		Intensive+Prewash. Press again to deselect.
07	Bubble Soak	Press to activate/deactivate the Bubble Soak function. This function
		helps remove a wide variety of stubborn stains.
		Delay End lets you set the end time of the current cycle. Based
		on your settings, the start time of the cycle will be determined
08	Delay End	by the machine’s internal logic. For example, this setting is useful
		for programming your machine to finish a wash at the time you
		normally return home from work.
		• Press to choose a preset unit of hours.

Operations

English  29

WW8SJ5260GW_03504Q-01_EN.indd 29

2016/4/8 15:50:01