Samsung WW90J6410CW/LP, WW90J6410CX1LP manual Operations, Control panel

Operations

Control panel

02

				08
				10
01				09
03	04	05	06	07
				11

Operations

01 Cycle Selector	Turn the dial to select a cycle.
02 Display	The display shows current cycle information and estimated time
	remaining, or an information code when a problem occurs.
03 Temp.	Press to change the water temperature for the current cycle.
04 Rinse	Press to change the rinse count for the current cycle. You can set
	the rinse count to a max of 5.
	Press to change the spinning speed for the current cycle.
	•	Rinse Hold : The final rinse process is suspended so that the
05 Spin		laundry remains in the water. To unload the laundry, run a drain
		or spin process.
	•	No Spin : The drum does not spin after the final drain process.
06 Options	Press to select an option from Intensive, Pre Wash, Bubble Soak
	and Quick Wash 15’/30’. Press again to deselect.
07 Bubble Soak	Press to activate/deactivate the Bubble Soak function. This function
	helps remove a wide variety of stubborn stains.
	Delay End lets you set the end time of the current cycle. Based
	on your settings, the start time of the cycle will be determined
08 Delay End	by the machine’s internal logic. For example, this setting is useful
	for programming your machine to finish a wash at the time you
	normally return home from work.
	• Press to choose a preset unit of hours.
09 Quick Wash	For lightly soiled garments of less than 2 kg that you want to wash
15’/30’	quickly.
10 Power	Press to turn on/off the washing machine.
11 Start/Pause	Press to start or stop operation.

32  English

Untitled-6 32

3/31/2017 12:16:33 PM