Operations
Control panel
02 |
|
|
|
|
|
| 11 |
08 |
| 09 | 10 |
|
|
| 12 |
07 |
|
|
|
03 | 04 | 05 | 06 |
01 | Cycle Selector | Turn the dial to select a cycle. |
|
|
|
|
|
|
| The display shows current cycle information and estimated time |
|
02 | Display | remaining, or an information code when a problem occurs. |
|
|
| For buttons and icons, refer to the corresponding page. |
|
|
|
|
|
03 | Temp. | Press to change the water temperature for the current cycle. |
|
|
|
|
|
04 | Rinse | Press to change the rinse count for the current cycle. You can set the |
|
rinse count to a max of 5, depending on the cycle. |
| ||
|
|
| |
|
|
|
|
|
| Press to change the spinning speed for the current cycle. The |
|
|
| revolutions per minute (RPM) differs with the model. |
|
|
| • Rinse Hold(No indicator): The final rinse process is suspended so |
|
|
| that the laundry remains in the water. To unload the laundry, run |
|
|
| a drain or spin process. |
|
|
|
| |
05 | Spin | rpm numeric indicators turn off. Not available for the DRAIN/ |
|
|
| SPIN cycle. |
|
|
| • Spin Only: To run the Spin Only cycle, press Spin for 3 seconds. |
|
|
| When the cycle time and spinning speed appear, press Spin |
|
|
| repeatedly until a desired spinning speed is selected. Then, |
|
|
| press and hold Start/Pause (Hold to Start) to start the cycle. The |
|
|
| spinning time depends on the selected cycle. |
|
|
|
|
|
06 | Options | Press to select the options. Availability of the options depends on |
|
the cycle. |
| ||
|
|
| |
|
|
|
|
|
| Delay End lets you set the end time of the current cycle. Based |
|
|
| on your settings, the start time of the cycle will be determined |
|
07 | Delay End | by the machine’s internal logic. For example, this setting is useful |
|
for programming your machine to finish a wash at the time you |
| ||
|
|
| |
|
| normally return home from work. |
|
|
| • Press to choose a preset unit of hours. |
|
|
|
|
|
|
| English | 33 |
Operations
2018/1/10 16:42:05
