Starting to Heat
You must select the HEAT mode if you wish to adjust the:◆Heating temperature◆Fan speed when Heating1If necessary, press the ON/OFF() button.
Result: ◆ The OPER. light on the indoor unit switches on.
◆The operation mode previously set is displayed.
◆The indoor unit beeps twice.
◆The air conditioner starts up in the current mode.
IMPORTANT The air conditioner is fitted with a protection feature which prevents the unit from being damaged when it is started
immediately after being:
◆Switched on
◆Stopped
After a rest period of three minutes, it will start up normally.
2Press MODE under the remote control flap one or more times until the HEAT indicator is displayed.
3Select the temperature by pressing the TEMP.SET ▲ or ▼ buttons one or more times until the required temperature is displayed.
Possible temperatures are between 16°C and 30°C inclusive.
NOTE Each time you change the temperature by one degree, the indoor unit beeps.
The air conditioner will only start cooling if the room temperature is higher than the selected temperature.
The fan will, however, operate. During heating, the operating light is red.
During defrosting, LED may indicate temperature lower than real one.
4Select the fan speed by pressing the FAN SPEED button one or more times until the required setting is displayed:
Low
Medium
High
Auto
NOTE Each time you change the fan setting, the indoor unit beeps. For the first 3 to 5 minutes the fan operates very slowly until the air has been sufficiently warmed.
Once the correct temperature has been reached,
it will be automatically switched to the selected speed.
5Control the air flow direction when necessary. Refer to page 16.
ENGLISH
C