Setting the Time

C

Your air conditioner contains a clock used to start or stop the unit automatically at a given time.

You must set the time when you:◆Purchase the air conditioner◆Replace the batteries

NOTE Be sure to change the time in an area where summertime is applied.

1Insert the batteries.

Result: The TIME indicator flashes.

NOTE To set the time during the operation.

Open the lid on the rear side of the remote control, and press the (time set) button using a tool with a sharp end point.

Result: The TIME indicator flashes.

2Press the TIME ▲ or ▼ buttons, and set the current time.

NOTE ◆ Each time the (▲) button is pressed, the time increases by one minute.

When the (▲) button is continually pressed, the time increases by ten minutes.

◆Each time the (▼) button is pressed, the time decreases by one minute.

When the (▼) button is continually pressed, the time decreases by ten minutes.

Result: AM or PM are displayed to indicate whether the setting

corresponds to a time before or after midday.

3 After setting the time, press the (time set) button one more time.

Result: The Time indicator stops flashing and the clock is started.

E-8