Samsung XE300TZCK01US Using the Sound Recorder, Recording Device, Apps, Set Default and click OK

Adjusting the Volume	Using the computer	57
	Chapter 3.
Using the Sound Recorder	Connecting and using a Ear-set / headset Jack

The procedures to record sound using the Windows Recorder are described below.

1	Connect a microphone to the microphone jack.
	Or use built-in microphone.
2	Right-click over the Volume icon on the taskbar and select
	Recording Device.
	Check if the microphone is set as the default recording
3 device.
	If this is the case, it is already set as the default device. If not,
	right-click over the microphone and select Set default.
4	Right-click over the Charms menu > Start		to click All
	Apps	> Sound Recorder. Then press Start Recording to

record.

When there is no sound after connecting an earset or headset, configure the settings as follows.

1	On the Desktop, click the Charms menu > Settings	>
	Control Panel > Hardware and Sound > Sound > Play tab.
2	Select the Speakers (Intel SST Audio Device (WDM)), click
	Set Default and click OK.