Samsung YP-35 manual HowHow toto checkcheck Usbusb driverdriver

Connecting yepp to PC with USB cable

3 Plug one end of the USB cable into the USB port on the back of the PC.

● The yepp will automatically turn on.

4 Connect the opposite end of the USB cable to the USB cable port on the bottom of the yepp.

●If you disconnect the USB cable from your PC while implementing a command or initializing during USB driver installation, your PC may not function correctly.

5 USB driver is installed with a message saying that it is searching for a new device. You may not see the display screen during installation.

Go to the device manager to check that installation has been successfully completed.

6 Upon installation of the USB driver "SAMSUNG YP-35”will appear in the

[System Properties] ➝ [Device Manager].

USB connect cable

Note :

HowHow toto checkcheck USBUSB driverdriver

Windows 98:

Control Panel ➝ System ➝ Device Manager ➝

Universal Serial Bus controllers/SCSI and RAID controllers

Windows 2000:

Control Panel ➝ System ➝ Hardware ➝

Device Manager ➝ Universal Serial Bus controllers ➝

USB Mass Storage Device

Windows XP:

Control Panel ➝ System ➝ Hardware ➝

Device Manager ➝ Universal Serial Bus controllers ➝

USB Mass Storage Device

Note :

If the YP-35 program has not been installed in Windows 98, then it will not communicate with you’re your solid disk. You must install the USB driver file first.

7 When USB driver is not Installed automatically, refer to next page.

Note :

For WinXP, the following window will appear whenever you connect the USB cable to your YP-35.

14 15