YP60_AME ENG i 9/21/04 9:2212:0 Page 18
Manual Installation of the USB Driver
Go to “Using yepp Studio” on page 24 if the USB driver is in place.
Follow these steps if the USB driver is not in place.
When an error occurs during installation of the USB driver
1 Check the device manager.
●Windows 98,ME:
Control Panel → System → Device Manager
●Windows 2000:
Control Panel → System → Hardware →
Device Manager
●Windows XP:
Control Panel → System → Hardware →
Device Manager
2 Check if there is a device listed with an exclamation point or a question mark (displayed as unknown device or USB device).
3 Double click on the device listed with an exclamation point or a question mark.
18
After selecting the driver, | Select a compatible driver, |
4 click on [Update Driver]. | 5 click on [Next] to finish. |
19
