YP60_AME ENG i 9/21/04 9:2212:0 Page 16
Connecting the yepp to a PC
Connecting the yepp to a PC with a USB cable
4 Connect a USB cable to the USB port on the computer.
5 Connect the opposite end of the USB cable to the USB cable port on the right side of the yepp.
● If you disconnect the USB cable from your PC while implementing a command or initializing during
USB driver installation, your PC may not function correctly.
| The USB driver is installed with a message saying that | USB |
| display screen during installation. | connect |
6 it is searching for a new device. You may not see the |
| |
| Go to the device manager to check that | cable |
|
| |
| installation has been successfully completed. |
|
7 | Upon installation of the USB driver |
|
"SAMSUNG |
| |
| [Start] → [Settings] → [Control Panel] → |
|
| [System Properties] → [Device Manager]. |
|
16
How to check the USB driver
●Windows 98/ME:
Control Panel → System → Device Manager → Disk drives → SAMSUNG
●Windows 2000:
Control Panel → System → Hardware → Device Manager → Disk drives →
SAMSUNG
●Windows XP:
Control Panel → System → Hardware → Device Manager → Disk drives →
SAMSUNG
8 When the USB driver is not installed automatically, refer to the next page.
17
