Setting the System
Select System in Settings.
IResume
●Use , to select Resume On or Off.
● On: Playback will resume from the point it was previously | Resume | |
On | ||
stopped. | ||
Off |
●Off: Playback will resume from the beginning of the track.
I Default Vol
●Use , to set the default volume to a level between 0 and 30.
● If the power is turned on again after having adjusted the | Default Vol |
| |
volume to a level above the default volume |
|
(for example: 20) music is played at the default volume level. |
|
●If the power is turned on again after having adjusted the volume at or below the default volume (for example: 20 or lower), the music is replayed at the previous volume.
I Search Speed
●Use , to set Search Speed.
● You can select 1sec ➔ 3sec ➔ 5sec ➔ 10sec ➔ 15sec ➔ | Search Speed |
20sec ➔ 30sec ➔ 1min. |
|
●Search Speed determines the speed of search when you press
and hold the , button while listening to music.
✍Note
- For a VBR or Ogg file, the Search Speed may not be uniform.
46
Setting the System
I Skip Interval
●Use , to set Skip Interval.
● You can select 1Track ➔ 5sec ➔ 10sec ➔ 15sec ➔ 30sec ➔ | Skip Interval |
1min. |
|
●Skip Interval determines the interval to be skipped when you
press the , button in Music mode.
●If you set the Skip Interval to 1 Track, if you press the button, the previous or next track will be selected.
✍Note
- For a VBR or Ogg file, the Skip Interval may not be uniform.
IBeep
●Use , to select Beep On or Off.
● On: The unit beeps when the buttons are pressed. | Beep | |
On | ||
● Off: The unit does not beep. | ||
Off |
IAbout
●If you select About, you can check the software version information, total number of tracks and remaining capacity.
47