Samsung YP-U2J manual Setting the System, Default Settings

Settings

Setting the System (Continued)

■<Bit Rate> : Selects the recording quality. Select either <32kbps> <64kbps> or <128kbps> (the higher the number is, the better audio quality and the larger the file size becomes).

■<Resume> : Specifies the starting point to restart playback after the music you are listening to is stopped. If set to <Off>, the last file listened to will play from the beginning. If set to <On>, the last file listened to will play from the point where last played.

■<Beep> : Sets the beep sound for button operations to on or off. Select either <On> or <Off>.

■<Default Vol> : The default volume can be set from 00 to 30(Max).If the power is turned on again after adjusting the volume above the default volume, music is played at default volume.

If the power is turned on again after the volume was set within the default volume, the music is played at the previously played volume.

■<Default Set> : Returns all settings to the default value.

■<About> : Checks the firmware version, number of stored files, remaining memory.

■ Regarding the Built-In Memory

NOTE The actual built-in memory available is slightly less than indicated as the internal firmware uses a portion of the memory.

Default Settings

Press the [ + , - ] button to select either <Yes> or <No> and then press the [ ] button.

■ <Yes> : Initializes all settings to default.

■ <No> : Cancels default settings.

50