Sangean Electronics ATS-808A manual Clock Radio Operation, Setting the Alarm

CLOCK RADIO OPERATION

With this receiver you can fall asleep to your favorite station by pressing the SLEEP button, or wake you to the morning news, or an alarm buzzer. Make the following

settings with the POWER off!

Setting the Alarm

1.Press STANDBY button so display shows 0:00. STANDBY will flash for

15 seconds.

TUNIGN

2.Press the numbered buttons to activate turn-on time using 24 hour time, in hours

and minutes. For example, to set the radio to turn on at 1:30 PM each day, press the buttons until the display shows 13:30. If the wrong number was keyed-in, delete it by pressing the CANCEL button marked C . One time for each number. Then press the correct number for the time you want.

.

3.When you reach your desired turn-on time, press ENTER, STANDBY stops flashing, your turn-on time is locked in. For 2 to 3

seconds, the clock returns to the current time automatically.

21