Sangean Electronics ATS-808A manual Choosing a Power Supply, Using Batteries

CHOOSING A POWER SUPPLY

You can operate the receiver using:

Six Alkaline AA Batteries.

Household AC [With optional AC adaptor]

12 Volt DC Automobile Battery [With optional DC adaptor]

USING BATTERIES

1. Press latch marked	OPEN	on both
battery ompartment	covers	in	he
direction of the arrow and lift			off cover.

2. Insert 4 AA		batteries in the Radio
compartment and 2 AA batteries in
the Back-up		compartment. Be sure
to position	them as illustrated on the
back of the	radio, and on top of the lift-out
ribbons for	easy removal.

3.Replace both battery compartment

covers over their respective compartments and press down until you hear it snap closed

2

1

3

1

4

2

NOTE
Whenever the radio is turned off, the battery	When the "MAIN" batteries become ex-
indiator will flash for about five seconds to
	hausted, the micro-processor will automa-
show battery condition.	tically be powered bythe "BACK-UP"
	batteries.
If the indicator falls below #2, the 4 "MAIN	When the display on the micro-processor
AA" batteries should be replaced.
	begins to fade, replace the 2 "AA" batteries
	in the "BACK -UP" circuit. Before you
	replace these batteries, be sure to install the
	4 "AA" batteries in the "MAIN" circuit to
	prevent total memory loss.

5