Sangean Electronics ATS-818ACS To Record with the Built-in Microphone, To Record from the Radio

To Record with the Built-in Microphone

Your cassette recorder has a built-in condenser microphone [21] on the front of the cabinet. To record with the built-in microphone follow the following steps:

1.Select CrO2/NORMAL Tape Selection Switch [38]

2.Press RECORD [26] and PLAY [27] but- tons simultaneously. RECORD will re-

31 30 29 2 8 27 2632

main in the locked position and the RECORD LED [23] will illuminate in- dicating recording is in progress.

Note: The tape will stop automatically when it comes to the end of a side. At this point the RECORD button and the PLAY button will disengage and the recording will be terminated.

3. To listen to your recording it will be necessary to Rewind the tape, Stop the tape, and then press the PLAY button [27].

To Record from the Radio

To record the current tuned program follow these steps:

31 30 29 2 8 27 26 32

1.Install blank tape and select CrO2/ NORMAL Tape Selection Switch [38].

2.To reduce interference when recording AM(MW,LW or SW) switch BEAT CUT Switch [40] to on position.

3.To listen to recording, rewind tape and press PLAY [27].

Note: The volume and balance controls have no effect during recording .They only Effect the play operation. The recording level is set automatically by the alc (Automatic Level Control) circuit.

27