Setting Time
When batteries are installed for the first time the LCD display time digit will flash indicating that the time needs to be set. The clock can be set with
the power off but the lockswitch 3 must be off. To set time press Time Set Button 8 for more then 2 seconds until hour digit flashes. While hour digit is flashing use Time Adjust Buttons 13 and 14 to select the correct hour. Pressing Time Set Button 8 again will cause the minite digit to flash. Use same procedure as hour set to set minite set. Press Time Set Button 8 to finalize time setting.
Long Term Alarm Set
Press Standby Button 11 for more than 2 seconds until hour digit flashes. Press Time Adjust Button 13 and 14 to set the required hour and then Press the Standby Button 11 again to cause the minute button to flash. Set minute desired same way as hour was set. Press Standby Button again to finalize setting.
7
