Setting the alarms, Using the Alarm buttons

SETTING AND USING THE ALARMS

The Wave® radio III has two independent alarms, Alarm 1 and Alarm 2.

Each alarm can be set for:

•Time

•Wake-up source: buzzer or radio

•Volume

Using the Alarm buttons

Using the Alarm buttons on the bottom of the remote you can setup and operate each alarm:

Press to turn Alarm 1 on or off.

• Press to activate the Alarm Setup mode and view Alarm 1 settings.

• Press again to view Alarm 2 settings.

• Press again to exit the Alarm Setup mode.

Press to turn Alarm 2 on or off.

The upper right-hand corner of the display shows the alarm status indicators if the alarm is set:

Example: Alarms 1 and 2 are set

You can choose the settings for each alarm by activating the Alarm Setup mode and displaying the settings for the alarm you want to change.

To setup Alarm 1 or 2:

1. Press Alarm Setup to activate the Alarm Setup mode and display the settings for Alarm 1.

Flashing

The alarm number and time start flashing.

Then the display shows you the current settings for Alarm 1.

2. Using the Time buttons, set the alarm time.

3.Select your wake-up source:

•BUZZER is the factory alarm setting.

•Press to choose a radio station.

4.Press Volume up or down to set the volume level of the selected

wake-up source.

5.Press to enter the Alarm 2 setup mode. Repeat Steps 2-4 to set up Alarm 2.

6.Press again to exit the Alarm Setup mode.

The alarm you set is turned on and the alarm time appears on the display:

Alarm number and time

English – 13