Bose III manual Re-scanningdigital radio stations, Displaying station information, Percentage

LISTENING TO RADIO

Re-scanning digital radio stations

You can re-scan for available digital radio stations at any time DIGITAL RADIO is selected. This capability is useful if you change the location of the Wave® radio III or decide to connect the external antenna.

1.Press and hold Mute until “AUTOSCAN”

is displayed, followed by

“PRESS PRESET 3 TO CONFIRM.”

2.Press the Presets 3 button. The messages,

“PLEASE WAIT SCANNING” appears on the display until scanning is finished.

When scanning is finished, the first primary station is played.

Displaying station information

There are three ways to display information about the currently playing digital station:

•Station name (default setting):

•Current program content:

•Program type:

To change the way station information displayed, press Play Mode until the type of information you want is displayed.

Displaying station signal strength

For the current station, signal strength is displayed as a numeric percentage of full signal strength and its classification.

To view the signal strength of the current station, press and hold Play Mode.

The signal strength ranges are:

Percentage		Classification
0	- 19	Low
20	- 39	Poor
40	- 79	Moderate
80	- 89	Good
90 - 100		Very Good

Note: If the station is “UNAVAILABLE” or “OFF AIR,” no signal quality information is available.

Note: Due to the technology used in digital radio broad- casting, the TALK RADIO mode for FM and AM radio is not available for digital radio stations.

12 – English