PERSONALIZING YOUR WAVE® RADIO III
Setting the room code
Your Wave® radio III comes from the factory ready to operate as a second room (room code B) when connected to a Bose® link enabled Lifestyle® system. If you want to use your Wave® radio III with your Lifestyle® system beyond a second room you will need to change the room code to match that of the remote control you are using for that room.
Refer to your Lifestyle® system owner’s guide for more information on room codes.
1. Press and hold Alarm Setup (Menu) until
2. Press Tune/Playlist > six times until
ROOM- B 
is displayed. The dashes following the room letter indicate how the microswitches should be set on the Lifestyle® remote control.
3. Press Time – or Time + to select a room code other than room B.
4. Press Alarm Setup (Menu) to exit the setup menu or wait 10 seconds for the setup menu to exit automatically.
Turning the touch pad on or off
If you do not wish to use the touch pad feature you can turn it off.
1. Press and hold Alarm Setup (Menu) until
2. Press Tune/Playlist > seven times until TOUCH PAD- is displayed.
3. Press Time – or Time + to select OFF or ON.
4. Press Alarm Setup (Menu) to exit the setup menu or wait 10 seconds for the setup menu to exit automatically.
Changing the system standby timeout
1. Press and hold Alarm Setup (Menu) until
2. Press Tune/Playlist > eight times
until AUTO OFF- is displayed.
3. Press Time – or Time + to select NO or YES.
4. Press Alarm Setup (Menu) to exit the setup menu or wait 10 seconds for the setup menu to exit automatically.
English – 19
