OPERATING YOUR WAVE® RADIO III
Reading the display
Source indicators: FM, AM, AUX,
DIGITAL RADIO
Clock |
Alarm status |
Station or
Turning the Wave® radio III on and off
To turn the system on or off (standby):
• Press the remote power button 
, or
• Touch the touch pad.
The last source you were listening to will be active.
Alternatively:
Press any source button to turn the
Wave® radio III on to that source.
Note: Pressing AUX does not turn on a device connected to AUX IN (such as your TV). Be sure to turn the device on first.
Note: After 24 hours of no button presses the system automatically switches to standby (off). If the
Controlling the volume
Press and hold Volume 
or 
to adjust the volume level. VOLUME - 0 (silent) to 99 (loud) appears on the display to indicate the level.
Press Mute to silence the Wave® radio III. Press Mute again, or press Volume 
to unmute.
To lower the volume before unmuting, press Volume 
while muted.
Note: When the Wave® radio III is off, the volume can only be adjusted between 10 and 75.
Setting the Sleep timer
Press Sleep to set the Wave® radio III to shut off automatically after a selected period of time.
•After pressing Sleep, SLEEP - 30 MIN (or your last
setting) appears on the display and the sleep timer begins counting down. If your Wave® radio III is off, press Sleep to turn it on and immediately set the sleep time. The last source selected will start playing as the sleep timer counts down.
•While the SLEEP setting is displayed, press Sleep again to set the sleep timer to
Note: While in sleep timer setup mode, if more than 10 seconds elapses between button presses, the Wave® radio
IIIwill automatically exit the sleep timer setup mode.
•To review the remaining sleep time, press Sleep.
•To cancel the sleep timer, press On/Off.
English – 9
