Bose III manual Setup menu, Personalizing Your Wave Radio

PERSONALIZING YOUR WAVE® RADIO III

System settings were selected at the factory to satisfy most owners of a Wave® radio III. However, if you wish to adjust the system settings see the instructions on the following pages.

The setup menu

The setup menu allows you to customize the operation of the Wave® radio III.

System Setting	Menu Item	Factory	Choices	Description
		Setting
Snooze Duration	SNOOZE-	10 MIN	10 MIN, 20 MIN,	Determines the snooze time duration.
			30 MIN, 40 MIN,
			50 MIN, 60 MIN, OFF
Radio Data System	RADIO TEXT-	ON	ON, OFF	Enables (ON) or disables (OFF) the system to
(RBDS) Information				display RDS information.
Clock Time	TIME-	12 HOUR	12-HOUR,	Sets the clock display for 12-hour (AM/PM) or
Format			24-HOUR	24-hour time.
Display High	BRIGHT HI-	10	8-15	Sets the display brightness level when the unit
Brightness Level				detects high ambient light conditions.
Display Low	BRIGHT LO-	4	1-8	Sets the display brightness level when the unit
Brightness Level				detects low ambient light conditions.
Room Code	ROOM-	B _ _ _ –	B _ _ _ –, C _ _ – _,	Sets the room code for your Wave® radio III when
			D _ _ – –, E _ – _ _,	it is connected to your Lifestyle® system through a
			F _ – _ –, G _ – – _,	Bose® link network.
				The dashes following the room letter indicate how
			H _ – – –, I – _ _ _,
				the microswitches should be set on the Lifestyle®
			J – _ _ –, K – _ – _,	remote control.
			L – _ – –, M – – _ _,
			N – – _ –, O – – – _
Capacitive touch	TOUCH PAD-	ON	ON, OFF	Enables (ON) or disables (OFF) the touch pad.
control
30 min. system	AUTO OFF-	YES	YES, NO	Enables (YES) or disables (NO) the 30-minute
standby timer				system standby timeout. Refer to “Turning the
				Wave® radio III on and off” on page 9.
System Reset	RESET ALL-	NO	NO, YES	Restores the Wave® radio III to factory
				settings.

To change a system setting:

1.Press and hold Alarm Setup (Menu) until -SETUP MENU- is displayed.

2.Press Tune/Playlist > until the menu item you want to change is displayed.

3.Press Time – or Time + to change the value or selection.

4.Press Alarm Setup (Menu) to exit the setup menu or wait 10 seconds for the setup menu to exit automatically.

English – 17