Using the radio for the first time

Using the AC power adaptor

The AC power adaptor required for this unit should be 9 volts AC at 1.4A.

Insert the adaptor plug into the AC socket on the rear of the radio. Plug the adaptor into a standard mains socket outlet.

The AC adaptor should be disconnected from the main supply when not in use.

Backup battery operation (for US version only)

1.Remove the battery cover on the bottom of the unit.

2.Insert two UM-3 (AA size) batteries into the spaces in the compartment.

3.Take care to ensure all batteries are inserted with correct polarity as shown inside the compartment. Replace the battery cover.

4.When the low battery capacity indicator shows on the display please replace the batteries immediately.

5.When the radio is used as clock radio or as an alarm, please always keep the batteries inserted.

13

Page 14
Image 14
Sangean Electronics RCR-10 manual Using the radio for the first time, Using the AC power adaptor