Sangean Electronics RCR-10 manual FM range setting, FM stereo auto / mono

FM range setting

FM range are different from countries to countries. It is necessary to adjust FM range to allow the radio to work properly.

1.Press and hold the INFO/MENU button to enter the menu setting.

2.Rotate the TUNING control till the range of FM shows on the display (refer to the picture in the right). Press the control to select the desired FM range. FM range setting is then completed. The available FM range is as following:

87-108 for the common area (default)

76-90 for Japan

64-108 for Eastern European countries and Russia

76-108 for some of China area and European countries

GB

2

FM stereo (auto) / mono

If the FM radio station being listened to has a weak signal some hiss may be audible. It is possible to reduce this hiss by forcing the radio to play the station in mono rather than stereo.

1.Press the Source button as needed to select the FM radio mode display and tune to the required FM station as previously described.

2.Rotate the Tuning control until the FM Stereo / mono setting shows on the display. If the setting is Auto press the Tuning control to switch to Mono mode to reduce the hiss.

3.To return to Auto (stereo) mode press and release the Tuning control to alter the setting, so that the radio will switch back to Auto mode.

18