
Network Settings (cont.)
Setting the SSID
Set the projector’s SSID.
The default setting is “SHARP_PRJ”.
Select “Wireless LAN” in the network menu on the menu screen
➝For operating the menu screen, see pages 50 and 52.
➝For operating the menu screen using the GyroRemote see pages 54 and 55.
1
2
3
Press or
to select
“Wireless LAN” and then press .
Press or
to select
“SS ID” and then press .
Press
or
to select the characters you want to set.
Note
•The characters can be entered fllowing: Letters (A to Z), numerical (0 to 9), symbols
•If you want to delete one character to the
left, select “BS” and press .
4 Press
.
•You can also move the cursor using on the GyroRemote.
Note
•If you want to correct a letter or symbol,
press or
to move the cursor to the character you want to correct, and then use
or
to correct the character.
•If you want to cancel the settings, press .
5 Repeat steps 2 and 3 to set all the characters.
Note
•A maximum of 16 characters can be set.
6 Press 

.
• The settings are enabled.
-72
72 | 02.4.29, 3:19 PM |