Setting On-screen Display | Sharp PG-M25X specs

4 Press to move the inset pic- ture.

•The inset picture will be moved to the inset picture frame.

Note

•The inset picture can only be displayed with composite video (NTSC/PAL/ SECAM) or S-Video signal.

•The Freeze function works only with the

inset picture, when the Pict in Pict mode is in operation.

When the signal entered into INPUT 1 is as follows, Pict in Pict does not work:

•With a resolution that exceeds SXGA.

•When the input signal is 480I, 480P, 720P or 1080I.

•When the input signal has changed to

the Interlace mode using RGB signals.

• When the picture display mode is set to “DOT BY DOT”.

•When no signals are sent to INPUT 1,

or when the resolution or refresh rate (vertical frequency) is changed.

•You can use on the GyroRemote or

on the projector to change the inset picture.

Setting On-screen Display

This function allows you to turn on or off the on-screen messages. When setting “ Level B” in “OSD Display”, the input mode display (e.g. “INPUT 1”) will not appear, even if the INPUT button is pressed.

Selected Item

Normal

Level A

Level B

Description

All On-screen Displays are displayed.

Input/Freeze/Enlarge/Auto Sync/Volume/AV Mute are not displayed.

All On-screen Displays are not displayed.

(except Menu, On-screen displays displayed when the LENS button is pressed, and warning displays (Power off/Temp./Lamp, etc.))

Easy to Use Functions

Turning Off the

On-screen Display

Select “OSD Display” in the “Options

(1)” menu

➝For operating the menu screen, see pages 50 and 52.

➝For operating the menu screen using the GyroRemote see pages 54 and 55.

Note

•Standby message in INPUT 4 will appear

regardless of “OSD Display” level.	-89

PG-M25X#E#p78_96.p65

89

02.4.29, 3:22 PM

Image 93

Sharp PG-M25X operation manual Setting On-screen Display, Turning Off On-screen Display, Press to move the inset pic- ture

Contents

PG-M25X Model No. PG-M25X Serial No PG-M25X#Ep00.p65 02.4.29, 305 PM Special Note for Users in the U.K Introduction Product Disposal Contrast Control Dynamic Gamma Outstanding FeaturesColor Management Function Noise Reduction Projector or computer can be placed anywhere you want Supports the global wireless LAN standard, IEEE802.11b Contents Wireless LAN PC card Troubleshooting Using a Memory Card Network SettingsMemory Card Settings Selecting the Picture Display Mode Introduction Power Sources CleaningPower-Cord Protection Read Instructions Replacement Parts Damage Requiring ServiceSafety Check Wall or Ceiling Mounting Important Safeguards Impact and/or vibration Other connected equipment For other operating systems For other languages To Install Acrobat Reader from the CD-ROMFor Windows For Macintosh Projector Front and Top View Part Names Projector Side View GyroRemote Inserting the Batteries Tapes for removing the batteries LED indicatorReplacing the Batteries Slide the cover in the direction of the arrow to close it GyroRemote GyroRemote Features Button Calibrating GyroRemote Accessories Supplied accessoriesOptional accessories Setup and Connections Using the Adjustment Feet Setup Standard Setup Front Projection Setting up the Screen Stretch Mode Normal ModeBorder Mode Screen Size and Projection Distance Projection from behind the screen Projecting a Reversed/Inverted Image Before Connecting Connecting the Projector to Other DevicesConnecting the Power Cord This projector can be connected to Ferrite core Connecting to a Computer Using the DVI to 15-pin D-sub Cable 910 3.0 m Connecting to a Computer Using a DVI Cable Sold Separately Connecting to Component Video Equipment Connecting to Video Equipment 1Composite video cable commercially available Removing the PC Card Installing the PC Card in to Input 4 Terminal Watching Images on Both the Projector and a Monitor Connecting to a Monitor Basic Operation Lamp Replacement indicator Power indicator Power button Basic ProcedureVolume buttons AV Mute button Input button Power button Image Projection Press or on the Gyro-Re- mote to adjust the volume Press and select the inputMode Image Projection Selecting the On-screen Display Language Adjusting the LensPress Zoom knob Focus ring Lens button Adjustment buttons Press or to adjust the Keystone correctionCorrecting the Trapezoidal Distortion Keystone Correction Correcting the Trap- ezoidal Distortion Press To reset Image Using the GyroRemote Before Using GyroRemoteButton Function Mouse Control Press on the GyroRemote Function AssignFunction 1 button Button Function Assign button Select Yesusing or , and press GyroRemote Channel SettingPress located on the GyroRemote Hold for more than 1 sec LED indicator Teach button Using in page 42, press on the GyroRemotes to Be usedRegistering Multiple GyroRemotes in One Projector Press on the GyroRemote you want to register Using the Pointer Using the Presentation ToolsUsing the GyroRemote. For details see Hold the GyroRemote Move it while pressing Using the GyroRemote For details see Using the Stamp Func- tionPress on the GyroRemote and then select Button Assign 1/5 Press on the GyroRemote to select the color How to drow lines and shapes Using the Line Function Computer and the Projector Connecting Connecting the GyroRemote with a Cable Using as a WirelessMouse Button Click button Gyro Active button Teach button Power button RF CH+ button Turning Off GyroRemotePress on the GyroRemote To turn on the GyroRemote Menu Selections on the Projector Adjustments Using the Menu Screen Press or to select the menu you want to adjust Press or to select the item you want to adjustPress or to adjust set the item selected Menu Selections on the projector Settings Menu button Adjustment buttons Enter buttonPress or to select theitem you want to set Cursor shifts to the sub menu Rear Right Sub menuWhile holding down , move the GyroRemote to Main menu Sub menu Menu Bar Items Input 2 / 3 Mode TCP/IP Adjusting the Picture Adjusting Image PreferencesSelecting the Signal Type 2D Progressive Progressive Mode Adjusting Computer Images When Auto Sync is OFFSaving Adjustment Settings Special Mode Settings Selecting Adjustment Settings Auto Sync Adjustment Checking the Input SignalWhen setting to Normal or High Speed Manual adjustments should be per- formed Auto Sync Display Function Easy to Use Functions Using the Network Before setting the networkIP Address What is a wireless channel? Wireless ChannelsAssigned wireless channels What is a Dhcp function? Installing a Wireless LAN PC Card Using a Wireless LAN PC CardEjecting the Card Select Eject PC Card Press Setting Up a Projector Name Network SettingsPress or to select Projector and then press Press in Name Press or to select the characters you want to set Setting the IP Address Setting the Subnet Mask Setting the Wireless Channel Repeat steps 2 and 3 to set all the characters Setting the Ssid Setting the Assign Start Address Setting the Dhcp ServerProcedure in Setting the IP Address Enabling the Dhcp server function Resetting the Network Settings Wireless LAN PC card Troubleshooting Displaying Contents in the Card as An Index Using a Memory Card Changing the page displayed Select or and press Setting the Thumbnail Display Selected image is displayed Setting Lists Memory Card Settings Setting FilesSetting the Display Order of Files Using Autorun Setting the Display Format of the Index ModeScript File Slide Show Setting the Display Interval for Image Files Displaying a Still Image For using the GyroRemote, see page 40 for detailsStoring an Image in Still Image Format Press to display Button Assign 2/5 Switching the Picture Display Using Different Input Signals Selecting the Picture Display ModeScreen display of the picture display mode Press to display Button Assign 4/5 Computer Press to display Button Assign 3/5 Displaying an Enlarged Portion of an ImagePress Function Button to enlarge the image Hold down and move GyroRemote to move the enlarged image Easy to Use Functions To rest default settings, press When Gamma is displayed Adjusting Gamma CorrectionGamma Correction Function Function Button Undo button Assign button Selecting the Power Save Mode Setting the Power Save ModeAutomatic Power Shutoff Function Displaying Dual Pictures Pict in Pict Input button Adjustment button \ Enter buttonDisplaying the Inset Picture Press To select Setting On-screen Display Turning Off On-screen DisplayPress to move the inset pic- ture Activating the sRGB Color Management Function Setting the Color Manage- ment Function sRGB Auto Search Function Using Auto Search Reducing Image Noise Video Digital Noise Reduction DNR System Setting the Video Signal Setting the Video SignalSelecting a Startup Image Selecting a Startup Image Saving Projected Images Capturing the ImageDeleting the Captured Image Selecting a Background Image Setting a Background Image Using an RGB Monitor Loop-out Adaptor Using an RGB Monitor Loop-out AdaptorDisplaying the Lamp Usage Time Confirming the Lamp Usage Time Displaying and Setting Break Timer Displaying the Break TimerTo cancel the break time When is displayed, press Or to set the Break Timer Reversing/Inverting Projected Images Setting the Projection Mode Setting up the Keylock Canceling the Keylock SettingLocking the Operation Buttons on the Projector Setting up a Password Entering the Password100 Changing the Password If You Forget Your Password101 Setting the Anti-Theft Entering the Keycode102 103 Changing the Keycode Enter the same 4-digit keycode in Reconfirm104 Initializing the Settings Returning to Default Settings105 Displaying the Adjustment Settings Overview of ALL Menu Settings106 Appendix Carrying the Projector How to Use Carrying CaseLens cap 108 Cleaning the projector MaintenanceCleaning the lens Cleaning the exhaust and intake vents About the Temperature Warning indicator Maintenance IndicatorsAbout Lamp Replacement indicator 110 Lamp Regarding the LampReplacing the Lamp 111 Press on the projector to turn off the power Removing and Install- ing the Lamp UnitDisconnect the power cord Power button AC socket User service screw Resetting the Lamp Timer Connecting Pin Assignments DVI Digital / Analog Input 1 port 29 pin connectorPin USB connector 115 Computer Compatibility Chart 116 Troubleshooting 117 For Sharp Assistance 119 Specifications Pcmcia Type Wireless LAN PC Card Specification Usable Cards and Their Capacity Units inches mm Dimensions Glossary WiFi Wireless channelSmart Stretch SRGB 102 Index Sharp Corporation