![](/images/new-backgrounds/1132858/132858171x1.webp)
Selecting the Picture Display Mode
This function allows you to modify or customize the picture display mode to enhance the input image. Depending on the input signal, you can choose “NORMAL”, “FULL”, “DOT BY DOT”, “BORDER”, “STRETCH” or “SMART STRETCH” image.
Switching the Picture
Display Using Different
Input Signals
For using the GyroRemote, see page 40 for details.
1 Press
to display “Button Assign 4/5”.
•The Assign function is displayed at the bottom right of the screen.
2 Press
.
Info
•In the “DOT BY DOT” mode, images are diplayed with the original resolution, therefore they are not enlarged.
•To return to the previous mode, press whle “RESIZE” is displayed on the screen.
Function 3 | ASSIGN |
button | |
| button |
Screen display of the picture display mode
-82
82 | 02.4.29, 3:21 PM |