
Setting the Video Signal
The video input system mode is preset to “Auto”; however, a clear picture from the con- nected
Setting the Video
Signal
Select “Video System” in the “Options
(1)” menu on the menu screen.
➝For operating the menu screen, see pages 50 and 52.
➝For operating the menu screen using the GyroRemote see pages 54 and 55.
Note
•The video signal can only be set in IN- PUT 2 or INPUT 3 mode.
•In “Auto”, images are displayed in PAL even if
PAL | When connected to PAL video equipment. |
SECAM | When connected to SECAM video |
| equipment. |
NTSC4.43 | When reproducing NTSC signals in |
| PAL video equipment. |
NTSC3.58 | When connected to NTSC video equipment. |
Selecting a Startup Image
This function allows you to specify the image to be displayed upon the projector’s startup.
Selected Item | Description |
Sharp | SHARP default image |
|
|
Custom * | User customized image (i.e. company logo) |
|
|
None | Black screen |
|
|
* You can set a captured image as a startup image by selecting “Custom”.
Selecting a Startup Image
Select “Startup Image” in the “Options
(1)” menu on the menu screen.
➝For operating the menu screen, see pages 50 and 52.
➝For operating the menu screen using the GyroRemote see pages 54 and 55.
Note
•When “Custom” is selected, an image saved using “Image Capture” can be dis- played as a startup image.
•A “Custom” image is preset as a black screen.
-93
Easy to Use Functions
93 | 02.4.29, 3:22 PM |