Correcting the Trapezoidal Distortion (Keystone Correction)
Correcting the Trap- ezoidal Distortion
This function allows for Keystone
The following explanation uses operations from the projector as example.
Note
•Keystone Correction is the correction for trapezoidal distortion that occurs when the image is positioned away from the center axis of the screen.
•The trapezoidal distortion can be corrected up to an angle of approximately ±35 degrees.
•The projector can be adjusted to a maximum of 10 degrees.
1 Press .
•Pressing again while the BORDER, STRETCH or SMART STRETCH screen is displayed will start the Digital Shift function. See page 39.
•You can also use on the GyroRemote.
2 Press or to adjust the Keystone correction.
•If you want to make more detailed cor-
rections, press to display the test pattern, and then press
or to make the adjustments.
•Adjustments can also be done using
the or button on the GyroRemote.
Note
•Since the trapezoidal distortion of the image can be corrected up to an angle of approximately ±35 de- grees, the actual screen can be di- agonally set up to that angle as well.
•Press to cancel Keystone Correction.
•You can delete using the button on the GyroRemote.
LENS button
Adjustment buttons
("'\ )
UND)O button
ENTER button
Normal screen |
| Keystone Correction screen | ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Compresses upper side.
Compresses lower side.
38 | 02.4.29, 3:12 PM |