Sharp PG-M25X operation manual Setting the Anti-Theft, Entering the Keycode, 102

Setting the Anti-Theft

Setting the anti-theft function will disable any projection of images even if signals are sent to the projector. A keycode is necessary to release the system lock. Make sure to remember the key code you set.

Info

If the keycode is not correctly entered in the key code field, only the key code screen will be displayed and no other operations will be possible. Repairing the system lock even within the period of guarantee will incur reparation costs. For details, refer to your nearest Sharp Representative. See page 118.

Entering the Keycode

•“Anti-Theft” cannot be selected unless “Password” is set. (See page 100.)

•When “Anti-Theft” is selected, the password input box will appear. Enter the keycode af- ter the right password is entered.

Select “Anti-Theft” in the “Options (2)” menu on the menu screen.

➝For operating the menu screen, see pages 50 and 52.

➝For operating the menu screen using the GyroRemote see pages 54 and 55.

1Press any button on the remote control or on the GyroRemote, to enter the keycode.

Note

•The following buttons cannot be set as key codes. (both on the projector and GyroRemote)

•POWER button

•ENTER button

•UNDO button

•MENU button

(GyroRemote)

•GYRO ACTIVE button

•POINTER button

•L-CLICK/ENTER button

•R-CLICK/UNDO button

•POWER button

•MENU button

•TEACH button

•RF CH+ button

-102

PG-M25X#E#p97_106.p65 102 02.4.29, 3:24 PM