
Network Settings (cont.)
5 Repeat steps 3 and 4 to enter the remaining characters you want.
Note
•A maximum of 16 characters can be entered
6 Press 

.
• The settings are stored and active.
Setting the IP Address
Set the IP Address of the projector.
Set “TCP/IP” in the network menu on the menu screen.
➝For operating the menu screen, see pages 50 and 52.
➝For operating the menu screen using the GyroRemote see pages 54 and 55.
1Press or
to select
TCP/IP and then press .
2Press or
to select “IP Address”, and then press
.
3Press or
to select the values you want to set.
4Press or
to move the cursor to the digit you want to correct.
Note
•You can also move the cursor by pressing on the GyroRemote.
•If you want to cancel the settings, press
.
-70
70 | 02.4.29, 3:18 PM |