Sharp PG-M25X operation manual Displaying Dual Pictures Pict in Pict, Displaying the Inset Picture

Displaying Dual Pictures (Pict in Pict)

Picture in Picture function allows you to display two pictures on the same screen. You can display the image input from INPUT 2 or 3 as an inset picture overlapping the main picture from INPUT 1. (This function can only be set in the RGB menu.)

Displaying the Inset Picture

Select “Pict in Pict” in the “Options (1)” menu on the menu screen. Make sure to operate when INPUT 1, INPUT 2 and INPUT 3 all have signals.

➝For operating the menu screen, see pages 50 and 52.

➝For operating the menu screen using the GyroRemote see pages 54 and 55.

1 Press to select .

•When operating with the GyroRemote,

press to display “Button Assign 3/5” and press 4.

•P in P does not function with INPUT 4.

2 Press to change the image in the inset picture.

3 Press , , or

to set the position of the inset picture.

•Press to stop the frame from mov- ing or to make the frame disappear.

Note

•Hold down and move the GyroRemote in all directions, when moving the position of the inset picture using the GyroRemote.

INPUT button

Adjustment button ('"\ )

Enter button

-88

PG-M25X#E#p78_96.p65 88 02.4.29, 3:22 PM