Sharp PG-M25X operation manual GyroRemote Channel Setting, Press located on the GyroRemote

Using the GyroRemote (cont.)

GyroRemote Channel Setting

The GyroRemote uses radio signals, which can receive interference under certain conditions. To avoid interference, when using multiple GyroRemotes, register a different channel for each GyroRemote in the projector. The GyroRemote has 8 channels for U.S., Canada, etc. and 4 channels for Europe, Australia, Oceania and Aisa.

1 Press located on the GyroRemote.

•You can also confirm the RF channel by the number of times the LED indicator flashes.

(Ex: RF Channel 3 if the LED indicator flashes 3 times.)

2 Hold for more than 1 sec.

• Each time you press for over 1 sec. the RF channel changes as shown below.

For U.S., Canada, etc.

→ 1 → 2 → 3 → 4 → 5 → 6 → 7 → 8

For Europe, Australia, Oceania and Asia

→1 → 2 → 3 → 4

Registering the GyroRemote in the Projector

When using one GyroRemote with multiple projectors or one projector with multiple GyroRemotes, the GyroRemote(s) should be stored in the projector.

1 Select “Register R/C” in the Option (1) menu.

2 On the“Do you want to enter the Learn MOde?” (If the Gyro is connected to projector by cable, temporarily unplug the cable from the projector and press ENTER button.) message,

select “Yes”using or , and press .

-42

LED indicator

RF CH+ button

RF CH : 3

Adjustment button ("'\ )

ENTER button

PG-M25X#E#p33_49.p65 42 02.4.29, 3:12 PM