Sharp PG-M25X Saving Projected Images, Capturing the Image, Deleting the Captured Image

Saving Projected Images

•This projector allows you to capture projected images (RGB signals) and set them as a startup image, or background image when no signals are being received.

•You can capture the images that are input using analog RGB signals and Digital RGB XGA signals.

Capturing the Image

Select “Image Capture” in the “Options

(1)” menu on the menu screen

➝For operating the menu screen, see pages 50 and 52.

➝For operating the menu screen using the GyroRemote see pages 54 and 55.

1Press or to select “ Save Image” and press .

•The projected image is captured. It may take some time for capturing.

21 Press or to select

“Yes”.

2Press .

Note

•This function only works in 1024 x 768 (XGA) with the exception of 43 Hz vertical which is a interlaced signal.

•The saved image is reduced to 256 col- ors.

•Images from equipment connected to INPUT 2 or 3 or images in INPUT 4 (card) cannot be captured.

Deleting the Captured

Image

1 Select“ Delete”and press .

2 1 Press or to select “OK”.

2Press .

-94

PG-M25X#E#p78_96.p65 94 02.4.29, 3:22 PM