Connecting the Projector to Other Devices (cont.)

Connecting to Video Equipment Using an S-VIDEO, a Composite Video or an Audio Cable

Using an S-VIDEO, video, or audio cable, a VCR, laser disc player or other audio-visual equipment can be connected to INPUT 2, IN- PUT 3 and AUDIO terminals.

1 Connect the projector to the video equipment using a ø3,5 mm to RCA S-VIDEO cable or a composite video cable (both commercially available).

2 Connect the projector to the video equipment using a ø3.5 mm to RCA audio cable (commercially available).

Note

The S-VIDEO INPUT terminal uses a video signal system in which the picture is separated into color and luminance sig- nals to realize a higher-quality image. For realizing a higher-quality image, use a commercially available S-VIDEO cable to connect the S-VIDEO terminal on the pro- jector and the S-VIDEO output terminal on the video equipment.

A ø3.5 mm minijack to RCA audio cable (commercially available) is required for audio input.

To S-VIDEO output terminal

To video output terminal

To audio output terminal

VCR or other audio-visual equipment

2ø3.5 mm to RCA audio cable (commercially available)

1Composite video cable (commercially available)

1S-VIDEO cable (commercially available)

-30

PG-M25X#E#p21_32.p65

30

02.4.29, 3:10 PM

Page 34
Image 34
Sharp PG-M25X operation manual 1Composite video cable commercially available