Sangean Electronics WR-11 manual Operating your radio FM

Operating your radio FM

1. Connect the Antenna

The radio comes with built-in AM/FM antenna. To improve

FM reception, insert the end of the supplied FM wire antenna into the F-type antenna terminal and adjust the wire for best reception. A 75 ohm coaxial cable of outdoor antenna may also be attached to the terminal. Be sure to switch external/internal antenna switch to external position while using the supplied wire antenna or connect the outdoor antenna. In some of the European countries, you may have to connect the supplied antenna terminal adaptor to connect with the outdoor antenna.

2.Turn on your radio by switching the Power knob to FM position.

3.Rotate the Tuning Control to select the desired station. On FM, the tuning scale is marked in MHz (Megahertz). The tuning LED indicator will appear brightest when best tuning has been achieved.

4.Adjust the Volume Control for comfortable listening.

5.To switch off the radio , turn the Power knob to OFF position.

7