Operating your radio AM

1. Connecting the antenna

The radio comes with built-in AM antenna which should be enough for normal listening. To improve the AM reception, you may connect the outdoor AM antenna with AM antenna terminal (USA version only).

2.Turn on your radio by switching the Power knob to AM position.

3.Rotate the Tuning Control to select the desired station. On AM, the tuning scale is marked in kHz (Kilohertz). The tuning LED will appear brightest when best tuning has been achieved.

4.Rotate your radio for best reception.

5.Adjust the Volume Control for comfortable listening.

6.To switch off your radio , turn the power knob to OFF position.

Headphone use

Headphone use with this radio should be fitted with a 3.5 mm jack plug. Insert the headphones plug into the socket marked on the rear side of the radio. When the headphones are plugged in, the loudspeaker is automatically disconnected.

AUX IN socket

 

GB

 

 

Connect a stereo or mono audio source (like CD walkman) to this input to listen the audio program via the speaker.

8

Page 9
Image 9
Sangean Electronics WR-11 manual Operating your radio AM, Headphone use