Step 2
Attach Upper Cord Hook
Pull the flexible cord support up toward the top of the handle.
Insert the lower half of the cord support into the upper cord hook.
Check to be sure slots in handle are correct, see Detail A. Place inner tab of cord hook into handle slot as shown (1) and press hook handle
(2) SNAPPING opposite inner tab into place (3).
B
Flexible
BagCord
SupportSupport
Hook
1. Place inner tab | 2. Press hook | 3. SNAP opposite inner |
into slot | around handle | tab into place |
Step 3
Attach Lower Cord Hook
Insert the power cord into the lower cord hook.
Snap the hook into the lower handle.
Pull up on the cord to tighten but leave enough | Upper Cord Hook |
slack near the base so there is no strain on the |
|
cord when the handle is lower. |
|
Step 4
Store Electrical Cord
Wrap the cord around the two cord hooks. Fasten the plug to the electrical cord to prevent unwinding.
Step 5
Attach Outer Bag
Important: To provide a good gasket seal, | Lower Cord Hook |
the bag coupling must seat |
|
firmly against the motor base |
|
and not overlap the furniture |
|
guard. |
|
Hold outer bag with zipper away from the handle. Start the bag screws (D) by hand, then tighten with a screwdriver.
Loop the bag spring onto the bag support hook on the back of the upper cord hook.
6
