How To Change Disposable Dust
CAUTION : Turn off the switch and unplug the electrical cord before changing dust bag. Never operate the vacuum cleaner without the dust bag.
Brush Roll Belt
The brush roll belt on the upright vacuum cleaner drives the brush to agitate, sweep, and comb the carpet nap. The belt should be checked regularly to be sure it is in good condition. Replace the belt if it is stretching, cracking, or slipping. Cut away any hair or thread wound around the brush roll or the belt pulley because the buildup could cause the belt to rotate unevenly.
How To Replace A Worn Belt, Style RD,
PN 52100A
1.Pull zipper down
THR
2. Roll down coil spring.
3. Pull bag throat off sleeve.
4.Unfold
new bag. 
5. Place bag throat on sleeve.
6. Roll up coil spring.
CAUTION : Turn off the switch and unplug the electrical cord before replacing belt. Belt pulleys can become hot during normal use. To prevent injury, avoid touching the belt pulley when servicing the drive belt.
IMPORTANT: Improper installation of the brush roll or brush roll belt could cause carpet or cleaner damage.
1. Release cam locks.
7.Place paper bag into outer bag.
NOTE: Be certain there are no folds at the top or bottom of the paper bag.
8.Lift zipper
GENUINE
Look for the 
symbol.
Ask for GENUINE EUREKA dust bags – Style F & G.
Cleaner Care
CAUTION : Turn off the switch and unplug the electrical cord before cleaning unit.
To keep the vacuum cleaner looking new, it can be wiped with a damp cloth and a mild soap solution, then thoroughly dried. Never use any type of chemical as chemicals can damage the cleaner. When not in use, the cleaner should be stored in a clean, dry place.
2.Pull up on belt to rotate it off the motor pulley. Lift up on brush roll and remove worn belt.
e
Brush Roll Pulley
Check for brush wear, see Brush Roll instructions.
3.Place new belt around brush roll.
4.Align brush roll pulley with belt guide.
5
