How To Replace A Worn Belt (continued)
5
5.Place rubber end cap covers over both end caps (flat side against end cap). Align holes and secure. Then, slant brush roll forward so end caps are in line with slots in cleaner base.
6.Push brush roll into base.
7.Place lower side of belt into belt guide and pull to stretch the belt around the left side of the motor pulley. Rotate pulley to secure belt into groove.
Brush Roll
The rotating brush roll sweeps and combs the carpet nap. Keep the brush roll free from hair and threads so it will con- tinue brushing. When the bristles of the brush roll no longer touch a straight edge held against the bottom plate, the brush roll is ineffective because the bristles no longer touch the carpet nap. To maintain the most effective cleaning, the brush roll should be replaced.
Headlight Bulb (Standard on most models), PN 40009A
CAUTION : Turn off the switch and unplug the electrical cord before replacing headlight bulb.
Headlight style varies by model. Locate the notches that release the tabs at either (1) top, (2) side, or (3) bottom of the lens, as illustrated. Place a screwdriver into one notch; twist or pry the screwdriver to release the lens. Repeat for the second notch on the opposite side.
Rotate the bulb socket forward. Push bulb in and turn to remove. Secure new bulb into socket and rotate bulb socket backward.
Replace the lens tabs into the top or the bottom of the hood opening. Rotate lens to position and press down at notch until the lens locks into position.
CAUTION : Use 25 watt replacement bulb, only.
Ask for GENUINE EUREKA replacement bulb, 40009A.
1
2
3
8 8
8.Place slots of bottom plate over tabs of cleaner base.
9.Seat and secure cam locks
Ask for GENUINE EUREKA replacement belts, Style RD
No. 52100A.
GENUINE
Look for the symbol.
6