Sansui HDLCD-3700 owner manual Remote control, HOW to Install Batteries, Battery Precautions

	8
	9
	10
4	11
5	12
	13
6	14
	15
	16

1.POWER Button = Used to turn the LCD TV.

2.SLEEP Button =To set the LCD TV to turn off after

a preset amount of time, use the SLEEP button on the remote control.

3.Direct Channel Selection Buttons (0-9) =Allows

direct access to any channel of the LCD TV.

4.- Button =This button is the "-" button used when selecting digital channels.

5.RESET Button - Press to reset the On-Screen picture adjustments to their factory preset positions.

6.CH (CHANNEL)^/v/CURSOR A / V Buttons = Used to operate the menu functions of the LCD TV, and to change the channels of the LCD TV.

Remote control

7.MENU Button = Use to display the On-Screen menu function.

8.MUTE Button =To turn off the sound, press this button once. The LCD TV will be silenced and the

symbol "MUTE" will appear on the screen. The muting feature can be released by pressing the

MUTE button again or one of the VOL (VOLUME) + or - buttons.

9.DISPLAY Button - When the TV is receiving an analog signal pressing this button will display the current information on-screen. When the TV is

receiving a digital, pressing this button once will display the digital information on-screen; pressing it a second time will display the analog information on-screen. To remove the display from the screen, press this button again.

10.PICTURE SIZE Button = Press to display PICTURE SIZE menu.

11.INPUT SELECT Button = Press to display SOURCE SELECTION menu.

12.QUICK VIEW Button =This button allows you to go back to the previous channel selected by just pressing the QUICK VIEW button. Press this button again to return to the channel you were watching.

13.CLOSED CAPTION Button - Displays text captions or full screen text on the screen for hearing impaired viewers.

14.ENTER Button - Use to enter or select information for On-Screen operations.

15.VOL (VOLUME) + / -/CURSOR 4 / _ Buttons = Used to operate the menu functions of the LCD TV. Press the _ button to increase, or the

button to decrease the sound level.

16.EXiT Button = Press to remove setup menu.

Before using the remote control, batteries must first be installed.

HOW TO INSTALL BATTERIES

1. Open the battery compartment cover.

2. Install two "AA" batteries (supplied).

3. Replace the battery compartment cover.

Use two "AA" size batteries. The batteries may last approximately one year depending on how much the

remote control is used. For best performance, it is recommended that batteries should be replaced on a yearly basis, or when the remote operation becomes erratic. Do not mix old and new batteries or different types.

BATTERY PRECAUTIONS

These precautions should be followed when using batteries in this device:

•Use only the size and type of batteries specified.

•Be sure to follow the correct polarity when installing

the batteries as indicated in the battery compart- ment. Reversed batteries may cause damage to the device.

•Do not mix different types of batteries together (e.g. Alkaline and Carbon-zinc) or old batteries with fresh ones.

•If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage.

•Do not try to recharge batteries not intended to be recharged; they can overheat and rupture. (Follow battery manufacturer's directions.)

9