Sansui HDLCD-3700 TV operation, Direct, To Select Analog Channels, To Select Digital Channels

TV operation

1

2

To turn on the TV, press POWER.

Adjust the volume level by pressing VOL + or -. The volume level will be indicated on the screen by white bars. As the volume level increases, so do the number of bars. If the volume decreases, the number of white bars also decreases.

3

4

Set the TV/CABLE menu option to the appropriate position (see page 23).

Press the	Direct	Channel
Selection (0=9,-) buttons to select
the channel.
TO SELECT ANALOG CHANNELS					ANT
				CABLE	ABCD
					1 2
1-9:	Press	0 twice,	then 1-9 as	ANALOG
	needed. Example, to select channel 2, press 0, 0, 2.
10-99:	Press	0, then	the remaining 2 digits. Example, to
	select	channel	12, press 0, 1, 2.
100-125:	Press	the 3 digits in order. Example,		to select
	channel 120,		press 1,2, 0.

TO SELECT DIGITAL CHANNELS

Press the first 3 digits, then press the - button, followed by the remaining 3 digits.

Example, to select channel 015-001, press 0, 1,5, -, 0, 0, 1.

•If a channel is selected with only audio content, "AUDIO ONLY" will be displayed on the screen.

•If a channel is selected with a weak digital signal, "DIGITAL CHANNEL SIGNAL STRENGTH IS LOW" will be displayed on the screen.

•If a channel is selected to which you have not subscribed, "DIGITAL CHANNEL IS SCRAMBLED" will be displayed on the screen.

NOTES:

•If a channel with no broadcast is

selected, the sound will automatically be muted.

•It may take a few seconds for a digital channel picture to appear on screen after being selected.

VHF/UHF/CABLE	CHANNELS
TV		CABLE
VHF		VHF
2-13		2-13
UHF	STD/HRC/IRC
14-69	14-36	(A) (W)
	37-59	(AA) (WW)
	60-85	(AAA) (ZZZ)
	86-94	(86) (94)
	95-99	(A-5) (A-1)
	100-125 (100)(125)
	01	(5A)

20