Sansui HDLCD5050A To connect a Hdmi or a DVI device to the unit, Rear and Left of the unit

To return to normal mode Press INPUT SELECT again.

Connections to other equipment

To connect a HDMI or a DVI device to the unit

The HDMI input receives digital audio and uncompressed video from a HDMI device or uncompressed digital video from a DVI device.

When you connect to a DVI device with a HDMI-to-DVI adapter cable, it transfers only video signal. Separate analog audio cords required.

Rear and Left of the unit	Audio cord (not supplied)		To DVI output
To PC/DVI AUDIO IN
	HDMI - to - DVI adapter cable		DVI device
	(HDMI type A connector)
	To HDMI IN	(not supplied)	or
	HDMI cable (type A connector)		HDMI device
			To HDMI output
		(not supplied)

NOTE:

• When using HDMI1/DVI IN to connect your HDMI or DVI devices, you must select the corresponding audio input source (HDMI or DVI) on the menu screen (see page 17). Otherwise you will only see the image with no sound.

To connect the TV to a PC (Personal Computer)

BEFORE YOU CONNECT THIS TV TO YOUR PC, CHANGE THE ADJUSTMENT OF YOUR PC’S RESOLUTION AND REFRESH RATE (60 HZ).

Connect one end of a (male to male) VGA cable to the video cord of the computer and the other end to the VGA connector PC MONITOR IN on the rear of the TV. Attach the connectors firmly with the screws on the plug. In case of a Multimedia computer, connect the audio cord to the audio output of your Multimedia computer and to the AUDIO IN connector of the PC/DVI AUDIO IN jack of the TV.You can also connect the PC with HDMI cable. If you use HDMI cable, you don’t have to connect the audio cord. If you use DVI-to-HDMI cable, please connect audio cord as same way as VGA cable.

Press INPUT SELECT on the remote control to select PC mode.

Switch on the computer. The TV can operate as the computer monitor.

Rear and Left of the unit

Monitor Display modes

Mode Resolution Refresh rate

			VGA	640x480	60/ 72/ 75 Hz
			VGA	720x400	70Hz
		To HDMI IN	SVGA	800x600	56/ 60/ 72/ 75 Hz
	To PC		XGA	1024x768	60/ 70/ 75 Hz
To			WXGA	1280x768	60Hz
	MONITOR	HDMI cable (not supplied)	WXGA	1280x720	60Hz
PC/DVI	IN		WXGA	1360x768	60Hz
AUDIO		VGA cable (not supplied)	SXGA	1280x1024	60Hz
IN
		Audio cord (not supplied)	WXGA+ 1440x900		60Hz
			FHD	1920x1080	60Hz

NOTE:

• The on-screen displays will have a different appearance in PC mode than in TV mode.

• If there is no video signal from the PC when the unit is in PC mode, “No signal” will appear on the TV-screen.

• When the PC connected to the HDMI terminal and 1920x1080 resolution (FHD) is selected, the top and bottom, right and left edges of the picture may be hidden on all picture sizes. In this case, use the PC MONITOR IN jack (VGA cable) is recommended to connect.

• When the PC’s resolution is set to 1920 x 1080/60 Hz (FHD mode), a signal that differs from the FHD signal, which has been confirmed operational on this TV, may appear depending on the PC used. In this case, “Auto Adjust” or other Position Adjustment functions may fail to correct the image position.

EN 14 To solve this problem, change the PC settings to select another resolution.