16
CABLE CHART
The chart below is typical of many cable system channel allocations.
NOTE:
• It may take a few seconds for a digital channel picture to appear on screen after being selected.
Automatic search
1 Press SETUP/TV MENU in the TV mode. The TV menu screen will appear.
2 Press ▲ or ▼ to select “Channel”, then press ▶ or
ENTER.
3 Press ▲ or ▼ to select “Auto Ch Memory”, then press ▶ or ENTER.
4 Press ▲ or ▼ to select “Automatic Search”, then press ▶ or ENTER.
Auto Ch Memory
Signal Type | Cable |
Automatic Search | Stop |
Analog Channel Found : 7
Digital Channel Found : 5
Programming Now
: SelectENTER:Cancel
5 The TV will begin memorizing all the channels available in your area.
• It may take from 15 minutes to 30 minutes to complete memorizing digital cable channels. Depending on the reception condition, a bar display may not advance for several minutes, please be patient.
NOTE:
•Memorizing channels is best accomplished during evening “PRIMETIME” hours, as more stations are broadcasting digital signals. Memorizing channels can only be accomplished while a station is broadcasting a digital signal to set that channel into memory.
•If you are unsure of the digital channels available in your area, you may visit www.antennaweb.org to receive a list based on your address or zip code. Should you require further assistance you may call our
•New digital channels may be added to your area periodically, it is recommended to perform the “Automatic Search” procedure regularly.
Adding Channel
If you find a new channel unregistered, you can add the new channel into the channel memory.
1 Tune in the new channel.
2 Press SETUP/TV MENU in the TV mode. The TV menu screen will appear.
3 Press ▲ or ▼ to select “Channel”, then press ▶ or
ENTER.
4 Press ▲ or ▼ to select “Add/Delete”, then press ▶ or ENTER.
Add/Delete
Adding Channel | >> |
Add/Delete | >> |
Clear All | >> |
: Select | ENTER:Set |
5 Press ▲ or ▼ to select “Adding Channel”, then press ▶ or ENTER. The new channel will be added into the channel memory.
6 Press EXIT/CANCEL to return to the normal screen.
|
|
|
CH | Signal |
|
2 | Analog | Add |
3 | Analog | Add |
Digital | Delete | |
Digital | Add | |
4 | Analog | Delete |
|
|
|
: Select | : Adjust |
|
6 Press ◀ or ▶ to select “Add” or “Delete”, whichever function you want to perform.
7 Repeat steps 5 - 6 for other channels you want to add or delete.
8 Press EXIT/CANCEL to return to the normal screen.
Clear All
All channels are deleted from the channel memory. 1 Press SETUP/TV MENU in the TV mode. The TV
menu screen will appear.
2 Press ▲ or ▼ to select “Channel”, then press ▶ or
ENTER.
3 Press ▲ or ▼ to select “Add/Delete”, then press ▶ or ENTER.
4 Press ▲ or ▼ to select “Clear All”, then press ▶ or
ENTER.
Add/Delete
| Adding Channel | >> |
|
| Add/Delete | >> |
|
| Clear All | >> |
|
|
|
|
|
: SelectENTER:Set
