Sansui HDLCDVD265 owner manual Film mode, Cinema Wide3 for letter box programs with subtitles

Press EXIT/CANCEL to return to the normal screen.

Press INPUT SELECT, then press ▲/▼ or Number button (6) to select the PC mode.

4

Picture

Picture Setting>>

Picture Preference Sports

Picture Size>>

Film ModeOn

PC Setting>>

DNROn

: Select : Adjust

NOTE:

• Auto Adjust feature is available only for 16:9 or 4:3 format.

• If no buttons are pressed for more than approx. 60 seconds, the Menu-screen will return to normal Monitor-screen automatically.

• The PC settings are not effective for other input modes.

DNR

DNR (Digital Noise Reduction) can reduce the roughness of the picture.

1 Press SETUP/TV MENU in the TV mode. The TV menu screen will appear.

2 Press ▲ or ▼ to select “Picture”, then press ▶ or

ENTER.

3 Press ▲ or ▼ to select “DNR”. Press ◀ or ▶ to select “On” or “Off”.

After adjusting, press ENTER to return to the PC Setting menu. Then continue to adjust the other items.

Press EXIT/CANCEL to return to the normal screen.

2

3

4

5

6

7

8

Cinema Wide3 (for letter box programs with subtitles)

To fill the width of the screen, it is extended horizontally. However; it is only slightly extended at the top and the bottom.

The top and bottom edges of the picture may be hidden.

A B C D E F G - - - - - - - - - - - - - - - -

A B C D E F G - - - - - - - - - - - - - - - - - - - - - - - - - -

Full (for 16:9 source programs)

Full will display the picture at the maximum size.

Native (for PC mode only)

Detects the resolution of the signal of the image and it will be shown on the screen with same amount of pixels.

NOTE:

• Some High Definition and/or Digital broadcasts may not allow you to change the picture size.

• In HDMI or COMPONENT mode with a scanning rate of 720p or 1080i, only the Cinema Wide2 and Full picture size feature is available.

• In PC Mode, only the Natural, Full and Native picture size features are available. In PC Mode (WXGA), only the Full and Native picture size features are available.

Film mode

A smoother motion may be obtained by setting the Film Mode to “On” when you view a DVD.

	Press SETUP/TV MENU in the TV mode. The TV
1 menu screen will appear.
2	Press ▲ or ▼ to select “Picture”, then press ▶ or
	ENTER.
3	Press ▲ or ▼ to select “Film Mode”.
	Press ◀ or ▶ to select “On” or “Off”.
		Picture
			Picture Setting	>>
			Picture Preference	Sports
			Picture Size	>>
			Film Mode	On
			PC Setting	>>
			DNR	On
4			: Select	: Adjust
	Press EXIT/CANCEL to return to the normal screen.

Picture control adjustment in the PC mode

You can adjust to optimize the performance of the TV in the PC mode.

1

Press SETUP/TV MENU. The TV menu screen will appear.

Press ▲ or ▼ to select “Picture”, then press ▶ or

ENTER.

Press ▲ or ▼ to select “PC Setting”, then press ▶ or ENTER.

The PC Setting menu will appear.

PC Setting

Hor Position	25
Ver Position	25
Clock	0
Phase	25
Auto adjust	>>
: Select	: Adjust ENTER:Set

Press ▲ or ▼ to select the desired item you want to adjust.

Press ◀ or ▶ to adjust the setting.

Hor	To adjust the horizontal position of
Position:	the image on the PC mode.
Ver	To adjust the vertical position of the
Position:	image on the PC mode.
Clock:	To minimize any vertical bars
	or stripes visible on the screen
Phase:	background.
	This must be adjusted after the
	frequency of the PC mode has
	been set to 60Hz to optimize
	picture quality (page 39).

Auto Adjust: To adjust the all PC settings

automatically

23