Assembly Instructions for Model: CFAR47
Thank you for choosing the Component Furniture line from Sanus Systems! Use this manual to configure the CFAR47 as shown on the right. The CFAR47 is de- signed to hold a LCD, Plasma or DLP TV.
Safety Warning: If you do not understand these directions, or have any doubts about the safety of the installation, please call a qualified contractor or contact Sa- nus at 800.359.5520 or www.sanus.com. Check carefully to make sure that there are no missing or defective parts. Our customer service representatives can quickly assist you with installation questions and missing or damaged parts. Replacement parts for products purchased through authorized dealers will be shipped directly to you. Never use defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified by Sanus Systems. Sanus Systems can not be liable for damage or injury caused by incorrect assembly, or incorrect use. Please call Sanus Systems before returning products to the point of purchase.
Required Tools: Drill, 3/16” drill bit, phillips screw driver, flat head screw driv- er, crescent wrench, tape measure.
Supplied Parts and Hardware: Hardware shown at actual size. Some parts may come
(4) Carpet Spike - a | (12) | Cam Pin - b | (8) Spacer - c | (8) Back Panel Bolt - d |
(2) Phillips Pan Head Bolt - e | (4) | Dowel - f | (4) Glass Shelf Pin - g | (8) Wood Shelf Pin - h |
(4) Wood Screw - i | (4) Knob Bolt - j** | (8) Hinge Plate Screw - k** | (16) Hinge Screw - l | |
(2) Tip Protector Bolt - m |
|
| (2) Stop Nut - n | (8) Hinge Car Bolt - o |
(2) Lag Bolt - p(2) Lag Bolt Washer - q(1) Allen Key - r
Sanus Systems 2221 Hwy 36 West. St. Paul, MN 55113 10.10.05
Customer Service: 800.359.5520. See complementary Sanus products at www.sanus.com
