Assembly Instructions for Model: VM200
Thank you for choosing a Sanus Systems VisionMount™ wall mount. The VM200 is designed to mount up to 40″ LCD TVs weighing less than 80 lbs [36.3 Kg] to a vertical wall. It will allow you to effortlessly tilt the TV ±20°
CAUTION: The size and weight of your television must not exceed 40” [1016 mm] diagonally and 80 Lbs [36.3 Kg]. The wall must be capable of suporting five times the weight of the televison plus the wall mount. Never use defective parts. Improper installation may cause property damage or personal injury. Do not use this product for any purpose that is not explicitly specified by Sanus Systems.
If you do not understand these directions, or have any doubts about the safety of the installation, please call a qualified contractor or contact Sanus Systems at 800.359.5520 or www.sanus.com. Our customer service representatives can quickly assist you with installation questions and missing or damaged parts. Replacement parts for products purchased through authorized dealers will be shipped directly to you. Check carefully to make sure that there are no missing or defective parts. Sanus Systems can not be liable for damage or injury caused by incorrect mounting, incorrect assembly, or incorrect use. Please call Sanus Systems before returning products to the point of purchase
NOTE: The supplied wall mounting hardware is not for metal stud or old cinder block walls. If you are uncertain about the nature of your wall, consult an installation contractor. Sanus makes every effort to assure all necessary television mounting hardware is included. If the hardware you need is not included please consult your local hardware store or call Sanus Systems.
Required Tools: Drill, 3/16″ drill bit, (1/2″ masonry bit for brick, concrete, or concrete block installations), wrench set, phillips screw driver
Supplied Parts and Hardware: (All threaded fasteners are shown full size.)
| Left Monitor Bracket - B | Right Monitor Bracket - C |
Wall Plate - A | Qty. 1 | Qty. 1 |
Qty. 1 |
|
|
Lag Bolt - D | Lag Bolt Washer - E | Concrete Anchor - F |
Qty. 3 | Qty. 3 | Qty. 3 |
M4 x 12 mm Bolt - G | M5 x 12 mm Bolt - H | M6 x 12 mm Bolt - I |
Qty. 4 | Qty. 4 | Qty. 4 |
M4 x 30 mm Bolt - J | M5 x 30 mm Bolt - K | M6 x 35 mm Bolt - L |
Qty. 4 | Qty. 4 | Qty. 4 |
M4 Lock Washer - M | M5 Lock Washer - N | M6 Lock Washer - O |
Qty. 4 | Qty. 4 | Qty. 4 |
M4/M5 Washer - P | M6 Washer - Q | M4/M5 Spacer - R | M6 Spacer - S |
Qty. 4 | Qty. 4 | Qty. 4 | Qty. 4 |
|
|
|
|
Sanus Systems 2221 Hwy 36 West, Saint Paul, MN 55113 06.08.06
Customer Service: 800.359.5520. See complementary Sanus products at www.sanus.com
