Weider 831.14623.0 user manual Arm Assembly

Arm Assembly	15	100
15. Attach the Butterfly Frame Brace (6) to the			103
		103
Right Upright (2) with two M8 x 80mm Bolts
(100), two M8 Washers (103), and two M8				78
Nylon Locknuts (78). Do not tighten the Nylon			4
		100
Locknuts yet.
Attach the Butterfly Frame (5) to the Right Top		6		103
	5
Frame (4) and the Butterfly Frame Brace (6)		100		2
with two M8 x 80mm Bolts (100), an M10 x
75mm Button Screw (118), two M8 Washers		78
(103), and two M8 Nylon Locknuts (78).	118
Tighten the M8 Nylon Locknuts (78) used in
this step.
16. Apply grease to the locations shown and attach	16
the Left Butterfly Bracket (28) to the Butterfly
Frame (5) with an M10 x 82mm Bolt (84) and
an M10 Nylon Locknut (77).		84
Repeat this step for the Right Butterfly	Grease
Bracket (29).				84
	29			Grease
	Grease	5
		77
		Grease		28
17. Remove the indicated Butterfly Arm Cap (43)	17
from the Right Butterfly Arm (26). Attach a
Butterfly Handle (27) to the Butterfly Arm with
an M10 x 65mm Button Bolt (106), two M10	27	Grease
Washers (80), two 13mm Steel Spacers (109),
and an M10 Nylon Locknut (77).			77
Attach the Butterfly Arm Cap (43) to the Right	106	77
Butterfly Arm (26) with an M10 x 82mm Button
Screw (92) and an M10 Large Washer (105).	80	80	82 29
		44
Repeat this step for the Left Butterfly Arm		109
				25
and Butterfly Handle (25, 27).		26
Apply grease in the locations shown and attach	105	43		27
the Right Butterfly Arm (26) to the Right	92
Butterfly Bracket (29) with an M10 x 75mm Bolt
(82) and an M10 Nylon Locknut (77). Press a
Bolt Cap (44) onto the end of the Bolt. Do not
overtighten the Bolt; the Butterfly Arm must
be able to pivot freely.
Repeat this step for the Left Butterfly Arm
(25).
	13