Weider 831.14623.0 user manual Cable Trap and Half Guards are oriented as Shown

34. Wrap the Lat Cable (49) under a 90mm Pulley	34
(48). Attach the Pulley and a Cable Trap (56) to
the second hole in the “U”-bracket (151) with an
M10 x 50mm Bolt (97), two Half Guards (55),
and an M10 Nylon Locknut (77). Make sure the
Cable Trap and Half Guards are oriented as
shown.	49
	48
	56
	77		55 97
	55		151
35. Wrap the Lat Cable (49) over a 90mm Pulley	35
(48). Attach the Pulley to the Left Top Frame
(126) wtih an M10 x 45mm Bolt (86) and an
M10 Nylon Locknut (77).
	126			49 86
	48
	77
36. Wrap the Lat Cable (49) under a 90mm Pulley	36
(48). Attach the Pulley, a Cable Trap (56), and
two Half Guards (55) at the second hole from
the top of the two Pulley Plates (60) with an
M10 x 50mm Bolt (97) and an M10 Nylon
Locknut (77). Make sure the Cable Trap and	77
Half Guards are oriented as shown.
			55
				49
				55
	60	56 48		97
			60
37. Wrap the Lat Cable (49) over a 90mm Pulley	37
(48). Attach the Pulley to the Right Top Frame
	4			86
(4) with an M10 x 45mm Bolt (86) and an M10
Nylon Locknut (77).
	77			49
		48
	19