Weider 831.14623.0 user manual Locknut 77. Make sure the Half Guards are Oriented as shown

50. Wrap the Leg Lever Cable (51) under a 90mm	50				51
Pulley (48). Attach the Pulley to the Right Base
		97		55
(1) with an M10 x 50mm Bolt (97), two Half					48
Guards (55), and an M10 Nylon Locknut (77).
Make sure the Half Guards are oriented as
shown.				1
					55	77
51. Wrap the Leg Lever Cable (51) over a 90mm	51
Pulley (48). Attach the Pulley to the Double “U”
-bracket (61) with an M10 x 50mm Bolt (97),
two Half Guards (55), and an M10 Nylon
Locknut (77). Make sure the Half Guards are
oriented as shown.
		97 55
					61
				51	77
					55
				48
52. Wrap the Leg Lever Cable (51) under a 90mm	52
Pulley (48). Attach the Pulley and a Cable Trap
(56) to the Right Upright (2) with an M10 x				51
120mm Bolt (115), two Guards (54), an M10	115			48
Washer (80), and an M10 Nylon Locknut (77).	54 80					2
Only tighten the Nylon Locknut two turns.			56 54
Make sure the Cable Trap is oriented as						77
shown.
53. Wrap the Leg Lever Cable (51) under a 90mm	53			51
Pulley (48). Attach the Pulley and a Cable Trap
	77			48
(56) to the Right Press Arm (16) with an M10 x
	55					97
50mm Bolt (97), two Half Guards (55), an M10		80
			56
Washer (80), and an M10 Nylon Locknut (77).			55	16
Make sure the Cable Trap is oriented as
shown.
	23